Assessing the Effect of Watershed Spatial Characteristics on Regional Calibration for a Single Event Flood Model: The Case of Kohsukhteh Catchment

Document Type : مقاله پژوهشی

Authors

• Sodabeh Behyan Motlagh
• Mehdi Pajoohesh
• Khodayar Abdollahi

Shahrekord University

10.22067/geo.v6i3.58862

Abstract

1. Introduction
Application of hydrological models is one of the common methods for quantitative analysis of watersheds. A class of these models is used to simulate rainfall-runoff processes. A hydrological rainfall-runoff model deals with integration of time series data, operational parameters, local variables and physical governing system laws in order to simulate runoff and other processes of the catchment. The flood hydrograph is an important graphical representation in hydrological analysis. The shape of hydrograph is a direct response to management strategies basin. In fact, watershed management is not possible unless hydrological characteristics of the basin could be fully understood.
HEC-HMS model is a rainfall - runoff model with either a simple lump or a quasi-distributed structure. The model was developed by Hydrologic Engineering Center of US Army Corps of Engineers. One important capability of this model is the possibility of its integration with ArcGIS. The HEC-GEOHMS extension automatically calculates most of the geospatial data that needs to be calculated manually. Its user-friendly interface offers several tools/icons such as the basin, reach, junction, etc. to enter the data. The component-based set up of the model makes it possible to modify the structure of the modeling system by the user. Different options for calculating the loss method, transmission, and streaming flow are available in HEC-HMS model. Each element has its own parameters or inputs. This flexible system provides an opportunity to apply the model to the regions with limited access to data. For a similar reason, models like HEC-HMS are useful tools to investigate the effects of changes in some of the spatial and temporal variables. In this study, the effects of the spatial scale on the optimization of HEC-HMS have been investigated.
The modeling parameter sets obtained by large scale setting generally outperform local scale hydrologic parameterization. Most research in the field of calibration of hydrological models has focused on the local parameters but if the at larger scales, it can be regionalized to other places. In such procedures, the sensitivity analysis is initially used to identify the most important parameters. The aim of this study was to compare local and large scale calibration.
2. Material and Methods
Kohsukhteh watershed is geographically located between 50 °40' to 51 ° 20 ' East longitude and 31° 20' North and 32 ° latitude. The study area covers an area of 2783 square kilometers. The minimum and maximum elevation values in this basin are 1705 and 3398 meters respectively. The average slope of the area is 19%. The mean recorded annual precipitation (Shahrekord synoptic station) is 320 mm.
Data preparation for HEC-GEOHMS was the first stage of modeling. Different physical characteristics, base maps and time series data of the basin were introduced to the model. The model set up was implemented by setting Loss, Transform and Base-flow methods for each sub-basin. The necessary steps for meteorological model and control specifications were taken as well. The 6-hour rainfall and 6-hour discharge time series were primarily used for the analyses. The model was parameterized at both local and large scale levels. Parameters related to Loss method, Transfer method and Routing were selected on the basis of model performance. In order to identify the most sensitive parameters, sensitivity analysis was performed. Given that the accuracy of the input parameters is an indicator of the efficiency of modeling and the results of the final simulation, the results depend on this stage. After identifying the sensitive parameters, they were selected to optimize the model locally and in a large scale. Despite the uncertainties and errors of the models, no computer model can expect a complete and accurate prediction. Therefore, they should be calibrated and validated. To evaluate the performance of models with different conditions, six events were chosen for the calibration and two for validation of the model.
3. Results and Discussion
Sensitivity analysis on the parameters of the model showed that Lag time parameter and initial abstraction had the highest sensitivity. Calibrated values of the model parameters were obtained for both calibration and validation events. The results of calibration in six events and the observed and simulated runoff volume in the basin were compared. Two events were selected to validate the calibrated model. Runoff discharge and volume for the basin were simulated. The values obtained by simulation were compared against the recorded observational data at the hydrometric stations were compared. After calibration and optimization of the model at local scale, the results showed that both estimated peak discharge and the time to peak flow, was performed better than obtained values for the basin scale simulation.
The inter-comparison among the events also show some differences in model performance. Event December 25, 2012 showed the highest accuracy and March 30, 2012 was simulated with the least accuracy. The difference may be due to the change in soil permeability during winter time. In the case of large scale model, the Event December 25, 2012 was simulated with high efficiency. Lag time, initial abstraction, curve number and impervious ratio were identified as the most important factors for calibration. The obtained Nash-Sutcliffe for local calibration was 0.85 while it dropped to 0.65 for large scale calibration.
4. Conclusion
Modeling is an indirect method that is much faster than field methods. In order to achieve accurate results in modeling, we need to estimate the model parameters as well as the time and place of variables. Calibration refers to the process of comparing of the measurements against the estimated values. The use of local scale calibration versus large scale calibration has a higher apparent accuracy, and this is in line with Samaniego, Kumar and Attinger (2010) and Hundecha and Bárdossy. (2004). However, the commutated value for Sutcliffe model efficiency is less variable in the case of local calibration. It was demonstrated that the simulated peak runoff was closer to observations in local calibration compared to the large scale calibration. A similar result was found with the simulated runoff volume using local calibration. Although, both calibration settings provided an acceptable response to the estimation of runoff; the obtained parameters at basin scale show less spatial sensitivities. This makes it possible to generalize the calibration results to nearby areas with limited data. The results show that the large-scale parameterization actually has less spatial dependency and therefore may provide more reliable results. This finding is in line with reported advantages of large-scale parameter estimations, in term of saving the time (Troy, 2008; Pokhrel, 2008; Beven, 2001). Sensitivity analysis also showed that parameters such as imperviousness and initial abstraction had a high sensitivity in the study area.

Keywords

• Global-scale optimization
• Hydrological modeling
• Local-scale optimization
• SCS

---

References

بحری، معصومه؛ دستورانی، محمدتقی؛ 1396. ارزیابی اثرات تغییراقلیم و تغییرکاربری اراضی بر پاسخ هیدرولوژیک حوزه آبخیز اسکندری. جغرافیا و مخاطرات محیطی. شماره22. صص 57-37.

تلوری، عبدالرسول؛ 1375. مدل‌های هیدرولوژی به زبان ساده. چاپ. تهران: انتشارات موسسه تحقیقات جنگل‌ها و مراتع کشور.

سلیمانی، کریم و دیگران؛ 1387. پتانسیل تولید سیل در حوضه‌های آبخیز با استفاده از مدل HEC-HMS در محیط سامانه اطلاعات جغرافیایی (مطالعه موردی حوضه معرف کسیلیان). پژوهش‌های جغرافیای طبیعی. شماره 65. صص 51-60.

علیزاده، امین؛ 1390. اصول کاربردی هیدرولوژی. چاپ. مشهد: انتشارات آستان قدس رضوی.

کریمی، مریم و دیگران؛ 1390. ارزیابی روش‌های مختلف شبیه‌سازی هیدروگراف سیل با استفاده از بسته نرم‌افزاریHEC-HMS (مطالعه موردی: حوضه آبخیز چهلگزی). مجله پژوهش‌های آب ایران. شماره 9. صص 29-38.

مراد نژادی، مریم ودیگران؛ 1394. الویت بندی زیر حوضه‌های مناسب بهره‌برداری جنگل با استفاده از مدل HEC-HMS (مطالعه موردی: جنگل خیرود). جنگل و فراورده‌های چوب. مجله منابع طبیعی ایران. شماره 2، صص 405-418.

مهدوی، محمد؛ 1386. هیدرولوژی کاربردی. چاپ، تهران: انتشارات دانشگاه تهران.

Abdulla, F and D. Lettenmaier., 1997. Development of regional parameterestimation equations for a macroscale hydrologic model. Journal of Hydrology, 197(1-4), 230–257.

Adamowski, J. (2013). Using support vector regression to predict direct runoff, base flow and total flow in a mountainous watershed with limited data in Uttaranchal, India. Annals of Warsaw University of Life Sciences - SGGW. Land Reclamation, 45(1), 71-83.

Agrawal, A. (2005). A data model with pre-and-post processor for HEC-HMS (Unpublished master’s thesis). Texas A & M University, Texas, America.

Ahn, G. (2007). The effect of urbanization on the hydrologic regim of the bigdarby creek watershed (Unpublished doctoral dissertation). Ohio State University, Ohio, America.

Alexander Braud, J. (2009). Impact of watershed delineation detail on hydrologic process modeling in low slop areas (Unpublished master’s thesis). Louisiana State University, Louisiana, America.

Asadi, A., & Boustani, F. (2013). Performance evaluation of the HEC-HMS hydrologic model for lumped and semi-distributed stormflow simulation (StudyArea: Delibajak Watershad). American journal of engineering research (AJER), 2(11), 115-121.

Bardossy, A., & Das, T. (2008). Rainfall network on model calibration and application.Hydrology and Earth System Sciences Discussions, 12(1), 77-89.

Bendient, P. B., Huber, W. C., & Vieux, B. E. (2013). Hydrology and floodplain analysis. England London :Pearson Publishing.

Beven, K. (2001). How far can we go in distributed hydrological modelling? Hydrology and Earth System Science, 5(1), 1-12.

Bhadra, A., Panigrahy, N., Singh , R., Raghuwanshi, N. S., Mal, B. C., & Tripathi, M. P. (2008). Development of a geomorphological instantaneous unit hydrograph model for scantily gauged watersheds. Journal of environmental modelling and software, 23(1), 1013-1025.

Bloschl, G. (2001). Scaling in hydrology. Hydrol Processes, 15(4), 709–711.

Boggs, J. L., & Sun, G. (2011). Urbanization alters watershed hydrology in the Piedmont of North Carolina. Ecohydrology, 4(2), 256-264.

Booij, M. J. (2003). Determination and integration of appropriate spatial scales for river basin modeling. Hydrol Processes, 17(13), 2581-2598.

Bormann, H. (2006). Impact of spatial data resolution on simulated catchment water balances and model performance of the multiscale TOPLATS model. Hydrology and earth System Science, 10(2),165-179

Butts, M. B., Payne, J. T., Kristensen, M., & Madsen, H. (2004). An evaluation of the impact of model structure on hydrological modeling uncertainty for stream flow prediction. Journal of Hydrology, 298(1-4), 242-266.

Cabral Moreira, A. A.,2013.Modelagem hidrologica da bacia hidrografica do Rio Granjeiro- Crato-CE. (MSc) Thesis. Universidade Federal do Ceara, 164.

Grove, M., Harbor, J., Engle, B. (1998). Composite vs. distributed curve numbers: Effects on estimates of storm runoff depths. JAWRA Journal of the American Water Resources Association, 34(5), 1015-1023.

Hundecha, Y., & Bardossy, A. (2004). Modeling effect of land use changes on runoff generation of a river basin through parameter regionalization of a watershed model. Journal of Hydrology, 292(1), 281–295.

Hydrologic Engineering Center- Hydrologic Modelig System. (2013). Hydrologic Engineering Center- Hydrologic Modelig System(HEC-HMS) Users manual (Version 4.0). US Army Crops of Engineers.

Ibrahim-Bathis, K., Ahmed, S.A. (2016). Rainfall-runoff modelling of Doddahalla watershed. Arabian Journal of Geosciences, 9(3), 1-16.

Karabowa, B., Sikorska, A. E., Banasik, K., & Kohnova, S. (2012). Parameters determination of a conceptual rainfall-runoff model for a small catchment in Carpathians. Annals of Warsaw University of Life Sciences-SGGW. Land Reclamation, 44(2), 155-162.

Kirchner, J. W. (2006). Getting the right answers for the right reasons: Linking measurements, analyses, and models to advance the science of hydrology.Water Resources Research, 42(3).

Lu, H., Hou, T., Horton, R., Zhu, Y., Chen, X., Jia, Y., Wang, W., & Fu, X. (2013). The stream flow estimation using the xinanjiang rainfall runoff model and dual state-parameter estimation method. Journal of Hydrology, 480(1), 102-114.

Mahmood, R., Jia, S., & Babel, M. (2016). Potential impacts of climate change on water resources in the Kunhar river basin, Pakistan. Water, 8 (1), 2-24.

Noori, N., Kalin, L., Sen, S., Srivastava, P., Lebleu, C. (2016). Identifying areas sensitive to land use/land cover change for downstream flooding in a coastal Alabama watershed. Regional Environmental change, 16(6), 1833-1845.

Olang, L. O., & Furst, J. (2011). Effects of land cover change on flood peak discharges and runoff volumes: Model estimates for the Nyando River Basin, Kenya. Hydrological Processes, 25(1), 80-89.

Parajka, J., Merz, R., & Blöschl, G. (2005). A comparison of regionalization methods for catchment model parameters. Hydrology and earth system sciences discussions, 9(3),157–171.

Pokhrel, P., & Gupta, H. V. (2010). On the use of spatial regularization strategies to improve calibration of distributed watershed models.Water Resources Research, 46(1).

Pokhrel, P., Gupta, H. V., & Wagener, T. (2008). A spatial regularization approach to parameter estimation for a distributed watershed model. Water Resources Research,44(12).

Samaniego, L., Kumar, R., & Attinger, S. (2010). Multiscale parameter regionalization of a grid‐based hydrologic model at the mesoscale. Water Resources Research, 46(5), 1-25.

Seneviratne, S., & Stöckli, R. (2008). The role of land‐atmosphere interactions for climate variability in Europe, Climate Variability and Extremes During the Past 100 Years, 33(1), 179–194.

Sup, M. S., Taley, S. M., & Kale, M. U. (2015). Rainfall-runoff modeling using HEC-HMS for Wan river basin. International journal of research in engineering,science and technologies, 28(1),21-30.

Troy, T., Wood, E. F., & Sheffield, J. (2008). An efficient calibration method for continental‐scale land surface modeling, Water Resources Research, 44(9).

Vassova, D. (2013). Comparison of rainfall-runoff models for design discharge. Soil and Water Research, 8(1), 26-33.

Walega, A., & Ksiazek, L. (2015). The effect of a hydrological model structure and rainfall data. Annals of warsaw university of life sciences – SGGW 47(4), 305-321.

Walter Drake, Ch. (2014). Assesment of flood mitigation strategies for reducing peak discharges in the upper Cedar River watershed (Unpublished master’s thesis). University of Iowa, Iowa, America.